There are four periods per each of the 7 days of the week, for both Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four periods below, must be performed independently in both Heat and Cool modes.


**FIRST: Select HEAT or COOL Mode as appropriate.


TO SET THE HEAT TEMPERATURE PROGRAM

While in HEAT mode, press MENU, then the SCROLL button one time, and “SET / REVIEW HEAT PROGRAMS” should be displayed at the top of the screen.  Press YES.  This will program all 7 days of the week, each day separately, in order of Mo, Tu, We, Th, Fr, Sa, Su).


MONDAY “MORN” Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for MORN.
  • Press YES to proceed (note: Next button will not save changes)
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for MORN.
  • Press YES to continue

MONDAY “DAY” Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for DAY.
  • Press YES to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for DAY.
  • Press YES to continue

MONDAY “EVE” Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for EVE.
  • Press YES to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for EVE.
  • Press YES to continue

MONDAY “NITE” Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for NITE.
  • Press YES to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for NITE.
  • Press YES to continue

Thermostat will now be on TUESDAY, MORN Period.  Continue using the same YES, YES, YES process shown above for each of the remaining Weekdays if there are any time or temperature differences between individual days of the week.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.



COPY TO REMAINING DAYS OF THE WEEK

If the values entered for MONDAY are to be used for the remaining Weekdays, complete all of Monday and press YES until you move into TUESDAY.  Once into Tuesday, press the COPY button at the bottom of the screen and the programmed day will automatically advance to show Wednesday.  Keep Pressing COPY until the remainder of the days are complete and the display comes all the way back to Tuesday again.  NOTE: the Copy feature will always copy “from” the previous day into the day that is currently shown.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.


TO SET THE COOL TEMPERATURE PROGRAM

While in COOL mode, press MENU, then the SCROLL button one time, and “SET / REVIEW COOL PROGRAMS” should be displayed at the top of the screen.  Press YES.  This will program all 7 days of the week, each day separately, in order of Mo, Tu, We, Th, Fr, Sa, Su).

Repeat all of the same steps shown above in Heat Mode Programming, for the Monday “MORN, DAY, EVE, and NITE” periods.  Press YES after each step.

Thermostat will now be on TUESDAY, MORN Period.  Continue using the same YES, YES, YES process shown above for each of the remaining days of the week if there are any time or temperature differences between individual days of the week.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.


COPY TO REMAINING DAYS OF THE WEEK

If the values entered for MONDAY are to be used for the remaining Weekdays, complete all of Monday and press YES until you move into TUESDAY.  Once into Tuesday, press the COPY button at the bottom of the screen and the programmed day will automatically advance to show Wednesday.  Keep Pressing COPY until the remainder of the days are complete and the display comes all the way back to Tuesday again.  NOTE: the Copy feature will always copy “from” the previous day into the day that is currently shown.

PRESS THE EXIT BUTTON IF COMPLETE TO RETURN BACK TO NORMAL USE.