There are four periods per each grouping of days, for Heat mode and Cool mode.  They are: MORN, DAY, EVE, NITE.  ALL 4 periods MUST be set for the thermostat to function properly.  Select either HEAT or COOL with the Temperature mode switch.  These same programming steps for all four periods below, must be performed independently in both Heat and Cool modes.


NOTE-1: This model has a user option to use only TWO periods instead of the default of FOUR.  In the 2-period configuration, all of the following steps are the same except there will be only DAY and NITE periods present.  NOTE-2: This model has a user option to be either programmable or non-programmable (manual).  If the clock or period times are not shown, check for this setting.


**FIRST: Select HEAT or COOL Mode as appropriate.


TO SET THE WEEKDAY AND WEEKEND TEMPERATURE PROGRAM

Move SET Slider to “TEMP PROG” (this will first program MON thru FRI at the same time, and then advance to SAT and SUN at the same time).


MORN Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for MORN.
  • Press NEXT to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for MORN.
  • Press NEXT to continue

DAY Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for DAY.
  • Press NEXT to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for DAY.
  • Press NEXT to continue

EVE Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for EVE.
  • Press NEXT to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for EVE.
  • Press NEXT to continue

NITE Period

  • Period Start Time should be flashing.  Use UP/DOWN buttons to set Time for NITE.
  • Press NEXT to proceed
  • Period Set Temperature should be flashing.  Use UP/DOWN buttons to set Temp for NITE.
  • Press NEXT to continue

The SAT and SUN days of the week will now be shown for programming, starting with the MORN period.  Repeat all of the same steps shown above for the Weekdays for the Saturday and Sunday “MORN, DAY, EVE, and NITE” periods.

MOVE THE SET SLIDER BACK TO THE RUN POSITION IF COMPLETE.