TX1500Uc
Advice and troubleshooting for your TX1500Uc thermostat
When you see the word “Filter” flashing in the display of the thermostat, it is simply a reminder to change the filter in the blower of your heating\cooling...
Wed, 26 Sep, 2018 at 12:09 PM
There are four periods per each grouping of days, for Heat mode and Cool mode. They are: MORN, DAY, EVE, NITE. ALL 4 periods MUST be set for the thermosta...
Wed, 26 Sep, 2018 at 12:10 PM
If you wish to adjust the displayed temperature up or down, there is calibration feature in your thermostat. Although it is factory calibrated and should ...
Wed, 26 Sep, 2018 at 12:31 PM
There are four periods per each grouping of days, for Heat mode and Cool mode. They are: MORN, DAY, EVE, NITE. ALL 4 periods MUST be set for the thermost...
Wed, 26 Sep, 2018 at 12:32 PM
(This is not applicable to models TX500Ua, TX1500Ua, and TX9100Ua) If your thermostat is behaving erratically or something strange is in the display, h...
Wed, 26 Sep, 2018 at 12:33 PM
The OFFSET setting is shown as number of degrees (default = 4F). It is similar in nature to the Swing setting, however, it only effects the operation of t...
Wed, 26 Sep, 2018 at 12:34 PM
The OFFSET setting is shown as a number between 0 and 9 (default = 4). It is similar in nature to the Swing setting, however, it only effects the operatio...
Wed, 26 Sep, 2018 at 12:35 PM
Note: Maximum time between button presses is 10 seconds A thermostat works by turning your heating or cooling system on and off whenever the room temp...
Wed, 26 Sep, 2018 at 12:36 PM
The following steps will allow you to switch between Standard and Military time: Setup options are performed using a menu on the display screen. To...
Wed, 26 Sep, 2018 at 12:20 PM
The thermostat comes from the factory set at 4 periods per day. This allows you to program 4 different start times with 4 different temperatures throughou...
Wed, 26 Sep, 2018 at 12:21 PM